What is Gps Tracker Parameter Editor V1.39l and Why You Need It
# How to Use Gps Tracker Parameter Editor V1.39l to Optimize Your Tracking Device
If you have a GPS tracker device such as GT30, GT30X, GT60, VT300, VT310, or MVT400, you may want to customize its settings and parameters to suit your needs. For example, you may want to change the frequency of sending location data, the communication mode (TCP or UDP), the APN name and password, the authorized phone number for SMS tracking, and so on.
To do this, you will need a software tool called Gps Tracker Parameter Editor V1.39l. This tool allows you to connect your tracker device to your computer via a USB cable and a USB-to-Serial adaptor, and then configure various parameters for your tracker.
In this article, we will show you how to use Gps Tracker Parameter Editor V1.39l to optimize your tracking device.
## Step 1: Install the software and driver
Before you can use Gps Tracker Parameter Editor V1.39l, you need to install the software and the driver for the USB-to-Serial adaptor on your computer. You can download the software from and the driver from . Run the installer files and follow the instructions on the screen.
## Step 2: Connect your tracker device to your computer
After installing the software and driver, you need to connect your tracker device to your computer using the USB cable and the USB-to-Serial adaptor. Make sure the tracker device is turned off before connecting it.
Then, open Device Manager on your computer and find Prolific USB-to-Serial Comm Port. Note down the COM number of this port. You will need it later.
## Step 3: Run Gps Tracker Parameter Editor V1.39l and configure your tracker
Now, run Gps Tracker Parameter Editor V1.39l from your desktop or start menu. You will see a window like this:

Select the same COM as the Device Manager shows and click Start. Then, press and hold the SOS button on your tracker device and turn it on. All LED lights on the device will be on. This means the device is ready to be configured.
Click the Read button to read all preset parameters from your device. You will see something like this:

You can now change any parameter you want by typing in the corresponding box or selecting from the drop-down menu. Here are some explanations of the parameters:
- GPRS: Check this box to enable GPRS tracking mode. This means your device will send location data to a server via cellular network.
- TCP/UDP: Choose TCP or UDP as the communication protocol for GPRS mode. TCP is more reliable but slower than UDP.
- Tracker ID: Set an ID for your device. This can be any number or string you want. It will help you identify your device on the server.
- APN: Set the name of your APN provider. This is usually provided by your SIM card operator.
- APN Account and APN password: Set the user name and password for your APN provider if any. If not, leave these boxes blank.
- IP and Port: Set the IP address and port number of your server where you want to receive location data from your device.
- Interval: Set the interval for sending location data in GPRS mode. The unit is second.
- SMS Tracking No: Set a phone number that is authorized to receive SMS location reports from your device.
- Interval: Set the interval for sending location data in SMS mode. The unit is minute.
- Password: Set or change a password for sending SMS commands to your device.
- Prefix (area code): Set a country code for sending SMS commands or receiving SMS reports from your device.
After changing any parameter, click Apply to save it to your device.
## Step 4: Test your tracker
To test if your tracker is working properly, you can send some SMS commands to it or check if it is sending location data to
Gps Tracker Parameter Editor V1.39l
## Step 5: Troubleshoot your tracker
If you encounter any problem with your tracker, you can try some of the following steps to troubleshoot it:
- Make sure your tracker device is fully charged and has a valid SIM card inserted.
- Make sure your tracker device is in an area with good cellular signal and GPS signal.
- Make sure your tracker device is configured correctly with the right parameters for your APN provider, server, and phone number.
- Make sure your server is online and can receive data from your tracker device.
- Make sure your phone number is authorized to send SMS commands and receive SMS reports from your tracker device.
- Make sure you are sending the correct SMS commands to your tracker device with the right password and prefix.
If none of the above steps works, you can contact your tracker device supplier or manufacturer for further assistance.
## Conclusion
Gps Tracker Parameter Editor V1.39l is a useful tool for customizing and optimizing your GPS tracker device. It allows you to change various parameters such as GPRS mode, communication protocol, tracker ID, APN name and password, IP and port, interval, SMS tracking number, password, and prefix. By using this tool, you can make your tracker device more efficient and reliable for your tracking needs.
We hope this article has helped you understand how to use Gps Tracker Parameter Editor V1.39l to optimize your tracking device. If you have any questions or feedback, please feel free to leave a comment below.
## Conclusion
Gps Tracker Parameter Editor V1.39l is a useful tool for customizing and optimizing your GPS tracker device. It allows you to change various parameters such as GPRS mode, communication protocol, tracker ID, APN name and password, IP and port, interval, SMS tracking number, password, and prefix. By using this tool, you can make your tracker device more efficient and reliable for your tracking needs.
We hope this article has helped you understand how to use Gps Tracker Parameter Editor V1.39l to optimize your tracking device. If you have any questions or feedback, please feel free to leave a comment below. b99f773239
https://www.anteroz.com/group/anteroz-espana/discussion/de8b65b4-2aeb-4b1e-b717-28b1de8cf272
https://www.ronidavis.com/group/roni-davis-group/discussion/fa9c3cec-e8ba-4637-8b95-c47105bf95f1